Automatic Stopper One machine dry cleaning sterilization Be Nanjing Hong steel machinery equipment factory Exclusive development of products, an industry first. Since the market has been well received by the users.



The device will be "washing machine" and "rubber plug drum Oven "Even a machine (box) that" rinsing, drying, sterilization, (silicon based), "Trinity, a synthesis, consistent with fluidized bed drying and electrical integration and" GMP "certified requirements, work continuously rotating drum, using hot air cycle, high efficiency filtration, heating, forced humidity and temperature to dry and sterilizing effects. This machine is used (water) powder for injection preparation rubber plugs, rubber plugs oral washing drying and sterilization of necessary equipment. In order to more effectively improved sterilization, and the additional equipment "ozone sterilization" device, but can also shorten the working hours of equipment to improve work results.



The device is PLC programmable controller and high-pressure water spray, silicification, sterilization drying time automatically in the box, the control panel user interface displayed automatically in the various states, PID temperature control of temperature in due course monitoring, human-machine interface operating parameters can be set according to process requirements on. When access to sterilization temperature sterilization process by the printer record temperature changes in the human-machine interface can be manually operated for washing and sterilization. Equipment parts in contact with stopper (316L) material, and the remaining parts of the use 1Cr18Ni9Ti material imported PLC and inverter speed can be adjusted automatic temperature control, using solid state relays, switches extended service life, pumps imported Danmaigelan Fu pump is reliable. All along the reduction of secondary pollution automatic washing stopper after sterilization by the National Bureau of Pharmaceutical Medicine Inspection Center found up to the national GMP standard, the device has small size, high output, function, compact structure, the appearance of generosity is the ideal Rubber Stopper Washing, Sterilizing equipment.



Automatically for the (row) of water, automatic heating, automatic access to compulsory humidity and temperature, and sterilized (after the first ozone-temperature work), Interactive door interlock, that is, bacteria areas to work out of the sterile material, while Equipment at work, no signal instructions, door does not open, complex and simple equipment. Purification Sterilization Grade: 100.



Equipment rotary vacuum dryer: The device is full Stainless steel 304 manufacturing, material thickness: wall 1.5mm, outsourcing 1.2mm. Its structure is as follows:



Box 1 set of drum 1, drive 1 set (motor, reducer and 1 table), the rotor to move the device a set, supply, drainage and 1 set, 1 set of overflow devices, high-speed centrifugal blower 1 set, forward, and 1 exhaust motor units (force into, ventilation and cooling), forward, highly efficient exhaust filters in 1 set (1000 Ã- 1000 Ã- 100mm), Jin, exhaust filters and 1 in effect set (200 Ã- 200 Ã- 100mm), 2 sets of electric throttle (forward, row), the linkage interlock device 2 sets (1 set of interlocking actions, door interlock 1 set), the heating assembly 1 set, 1 inner loop device cover, ozone sterilization device 1 set, 1 set of electronic control devices, including electronic control device consists of: PLC programmable man-machine interface touch screen 1 set (Panasonic components), silicon (SSR) 1, more than relays and contactors and heat more than the protection and phase sequence protection for the (row) of water Solenoid valve Control device and silicified, interlock device control components and other components. The spirit of sensitive equipment control, display precision, strong anti-interference, no control error. Good thermal insulation properties while machine (box filled with cotton 10cm aluminum silicate), the best door seal, water, temperature and absolutely no spills. (Into the drainage valve diameter were DN40 Ã- 2).



The device easy to operate, and correct action, low failure rate in the box the unit can be removed to facilitate inspection (dimensional) repair and equipment cleaning. The device has water, electricity isolation, use safe and reliable.



About Process: complete closure of belt cooler, close the side door of the main operation, configured automatically after the required settings to open supply valve, while the rotor began to work and carry out rinsing, the water level up here, "overflow "position automatically" overspill "(row of bubbles), rinsing time to shut down automatically to complete the rinse water supply valve, and automatically open drainage (sewage) solenoid valve, water (sewage) into the heating temperature automatically after the completion of the state, heating to 80 have a "water vapor" state when the humidity and automatically, that is: dehumidification fan to work (humidity and time and frequency can be set according to the material on its own), dehumidification is completed and automatically heated to 100, automatically holding status